Whenever users are trying to make ultra clear and precise dot indication for special work field of interference experiments, not able to rely on a simple green laser pointer or other manual dot projecting tool, it would be a much better solution for engineers or professionals to apply a highly bright light emitted tool of a 515nm green laser diode module. It applies the advanced 515nm green laser diode and a qualified optic lens inside a high duration metal housing tube, equipped with constant electric power source supply. On condition that direct diode emission made 515nm green dot laser alignment gets proper installation or integration into any optical experiment used machine or device, it achieves easy reaching, no physical contact and no mistake dot indication for all precise positioning works.
Green light emitted from a 515nm green laser diode module gets high visual sensitivity to the human eye, which is also intuitive and efficient adjustment. The 515nm wavelength falls within the peak range of the human eye’s luminosity function. Compared to red light, the green reference dot is more easily discernible under standard laboratory lighting, allowing for rapid visual assessment of center-point alignment without the need for additional instruments. Usually green dot laser alignment gets proper use of a metal heat sink cooling system inside a durable anodized aluminum alloy housing tube, available with different dimension of 16mm, 18.9mm and 26mm diameter design, it achieves superior nice heat dissipation and increasing stability green light and green reference dot projection in long term use, without light decay or blur under temperature fluctuation or other harsh workshop environment as well.
This glass coated lens 515nm green laser diode module keeps work with high beam stability with minimal refence positioning error. The green laser dot is highly circular with concentrated energy and minimal stray light, featuring a single, distinct central point, it significantly reduces coaxial alignment errors and directly enhances the clarity and contrast of interference fringes. When it projects highly precise and clear green reference dot at a long extending distance, green dot laser alignment is also resistant to thermal drift during long-term operation, maintains superior reference stability. As a semiconductor laser directly emitting green light at 515nm, it lacks the frequency-doubling crystal structure found in 532nm lasers. Consequently, heat generated during prolonged operation causes no wavelength or beam spot drift, ensuring the reference point remains stable during extended data acquisition in interference experiments.
Visible green light emitted from a 515nm green laser diode module does not interfere with signal acquisition, which avoids signal crosstalk with infrared coherent sources or the detection bands of photoelectric sensors, ensuring the integrity of raw interference data. Sometimes it is designed with TTL modulation power supply, it is also suitable for dynamic experiments, enables rapid switching and pulsed output of the laser spot. When paired with high-speed cameras to capture transient interference patterns, green alignment laser meets the requirements for observing instantaneous interference phenomena such as those caused by shock or vibration. It also provides professionals excellent green light source from initial reference positioning for interference system, locking the center point of interference fringes, coaxial alignment of coherent beams, optical path restoration after disassembly/reassembly etc.
Category: green laser module
532nm Green Laser Line Generator in The Textile Industrial Field
Under operation of constant technical innovation of the advanced 532nm green DPSS laser tech and a qualified optic lens with wide fan angles inside a high duration metal housing tube, it is manufactured into a professional line measuring tool of a 532nm green laser line generator. It always projects fine, straight and highly visible green reference line with various line lengths and different line thickness. Being made with ultra compact size tube design, 532nm green laser module is working well with easy installation onto textile processing machine or device, bringing users easy reaching, noncontact and high precision guidance line indication for garment cutting, design and positioning works etc.
532nm green laser line generator always gets superior visibility compared to red light, compatible with various fabrics. The 532nm green light wavelength is close to the peak sensitivity of the human eye, offering 4–8 times the brightness of 635/650nm red light at the same power level. It remains clearly visible on black, dark, reflective satin, and denim fabrics, and is not washed out by workshop fluorescent lighting or natural light from windows. The real green laser line alignment is solving the issue of poor visibility associated with red light on dark materials. This green line laser module belongs to an industrial grade stability laser device, suitable for textile workshop environments. The durable anodized aluminum alloy housing tube is shock and vibration resistant, ensuring the marking line does not drift even amidst the continuous vibrations of cutting tables and sewing machines.
Basically 532nm green laser line generator applies a qualified glass coated lens with 10 to 110 degree fan angles, allowing freely adjusted focus so as to get different line thickness onto different textile garments. It operates across a wide temperature range and functions stably for over 8,000 hours in high temperature, lint-filled, or dusty workshop environments. It projects fine, sharp edge and highly straight green reference line within 0.5 meter to 6 meters length in distance. The focus adjustable design allows for fine-tuning the line width based on the cutting table height, meeting diverse needs ranging from precision cutting of thin fabrics to rough positioning of thick canvas.
Without spending extra time on prior line drawing or printing, 532nm green laser line generator enables no consumables or pollution, leaves no marks on fabric and removes the need for cleaning steps, making it ideal for processing high-end or light-colored fabrics. With the assistant of a laser alignment mounting bracket, it can be quickly mounted on various textile equipment, increasing the speed of fabric spreading, cutting, and sewing alignment. When green alignment laser gets constant power source supply, it provides continuous and convenient line indication for garment cutting table positioning, sewing machine guide lines, printing and dyeing alignment, fabric spreading and laying alignment, and embroidery machine positioning works etc. When laser users are aware of potential thermal energy hurt to eyes and wearing correct laser safety glasses, it just brings users easy, secured and long lasting line generation constantly.
High Precision 515nm Green Cross Line Laser Module For Crosshair Positioning in Metal Cutting
In process of highly precise, clear and bright cross line positioning work of metal, cutting, none of manual or mechanical cross line measuring tool can be comparable with a high precision 515nm green cross line laser module. The 515nm green laser is a direct diode emission green semiconductor laser with a built in 515nm green laser diode and a high precision glass coated lens with different fan angles inside. Being made with high duration and compact size metal housing tube, together with constant power supply and easy installation onto metal cutting machine or device, this 515nm green cross laser alignment is specially designed for industrial positioning works in metal cutting and other applications, which always gets no limitation of operating distance, height and other workshop environments as well.
Usually 515nm green cross line laser module projects ultra high visibility green laser light directly from an inner import 515nm green laser diode module within 50mW to 200mW. It gets special use of a metal head sink cleaning system design inside the different dimension analyzed aluminum alloy housing tube. Whenever it gets superior nice thermal emitting and thermal conductivity, this 515nm green cross laser alignment always projects 515nm green light with high sensitivity to the human eye and its brightness is at least five times that of red light. It remains clearly visible, even in metal reflections, strong workshop lighting and semi outdoor environments, eliminating visual fatigue and misjudgment etc.
In order to assure its long term lasted cross line projection accuracy and precision, this 515nm green cross line laser module applies a qualified glass coated lens with different fan angles of 10, 15 and 110 degree. Cooperated with a series of strict laser beam stability test, aging preventing test before its flowing into the laser market, in addition, when it gets low laser beam divergence and special TEM00 beam mod, this 515nm green cross laser alignment maintains low cross line thickness, and accuracy of the line width is less than 1nm at 5m work distance. It always gets low positioning error, which replaces manual labor, significantly reduces the scrap rate.
Whenever it keeps work with high beam stability green cross line generation, this 515nm green cross line laser module is greatly suitable for continuous industrial inspection and operation. It keeps works with direct imitating, bearing no thermal drift. Cooperated with built in constant current and temperature control system, this 515nm green cross laser alignment keeps works with stable cross line generation from wide range operating temperature, supporting 24h continuous projection without deviation, which is compatible with highly reflective metals, non reflective and glare free materials etc. For for highly reflective metals such as copper, aluminum and stainless steel, this 515nm absorption rate is better than 532nm, producing clear lines without glare or reflection interference.
Featured by high speed alignment during biting cutting, it always assures increasing efficiency by 30%. Owning to its compact and durable structure design, this 515nm green alignment laser always allows easy integration onto any metal processing machine or device, without any limitation by operating height, distance and other complex workshop, etc, it makes high speed marking and alignment, saving a lot of time on power station, making sure of rapid alignment during betting cutting. This 515nm green cross line laser module, with its featured advantages, has just make it applicable and compatible with highly reflective metals, which is an ideal choices for cross line positioning in metal cutting, significantly improving cross line positioning efficiency and processing accuracy for all precise metal processing works conveniently.
Non Contact Marking of 515nm Green Laser Line Generator In Tire Processing
Employed by an import 515nm green laser diode and a qualified optic lens with wide fan angles inside a highly durable metal housing tube, not simply made into a laser pointer, it is created into a more practically used device of a 515nm green laser line generator in tire processing works. It emits highly clear, visible and bright green light directly from an import 515nm green laser diode, configured with constant power source supply and basic thermal emitting system inside a durable metal housing tube with different dimension. Commonly 515nm green line laser alignment allows easy installation or integration with tire processing machine or device, achieving accurate alignment, no material damage line generation under various working conditions.
The 515nm green laser line generator applies a near middle wavelength among visible optical spectrum, projecting green light with high sensitivity and high brightness. 515nm green light is superior bright and visible compared with red light on black rubber and dark tire surfaces, remaining clearly visible even in reflective and dusty environments, making it easy for workers and vision systems to align. Being made with ultra compact size and durable structure, not limited by operating distance or high height, this 515nm green line laser alignment is mainly used in tire forming, tread and sidewall positioning, inserting, splicing alignment, and finished product inspection. It serves as a precise marking and alignment reference, replacing traditional ink lines and templates, improving tire structural consistency and batch stability.
In various tire processing works, in order to get different line length and line thickness, 515nm green laser line generator applies a qualified glass coated lens within 10 to 110 degree fan angles. Cooperated with adjustable focus optic lens, it can get immediately focused laser light, and converts into an increasing accuracy, share and uniform line, ensuring precise bonding, splicing, and drilling positions, reducing the failure rate of tire imbalance, bulges, and other problems. When 515nm green line laser alignment projects noncontact and no barrier green line onto tires, it enables no ink stains, no scratches, avoiding surface contamination and stress damage to rubber, directly improving the appearance and internal quality of the finished product.
When 515nm green laser line generator adopts a durable anodized aluminum alloy housing tube with different dimension, it is resistant to dust, oil, and vibration, capable of 24 hours continuous operation with stable brightness and no drift, long semiconductor structure lifetime and low failure rate etc. It can be easily installed on molding machines, nailing machines, and edge grinding machines. The adjustable alignment laser line thickness enables different wheel diameters and workstation distances. When it gets reduced manual alignment errors and trail and error time, lowering scrap rate, it is greatly compatible with automated production lines, supporting continuous production.
Continuously Operated 515nm Green Laser Diode Module in Machining Field Use
In order to make ultra clear, precise and bright dot indication for all machining processing works, either it is pointing at close or long distance, it would be a quite efficient job to apply a highly bright light emitted tool of a 515nm green laser diode module. It keeps work with intense and powerful forest green laser light emission directly from an import 515nm green laser diode, equipped with basic thermal emitting system inside a highly durable metal housing tube. Configured with an external electric power source supply, when green dot laser alignment gets proper installation or integration onto required machine or equipment, it brings users easy reaching, long operating time lasted and good direction green reference dot projection onto multiple working surfaces conveniently.
Basically 515nm green laser diode module gets constant power source from an AC/DC adapter, owing to the acceptation of 100V to 240V operating voltage, it is applicable for various working environments and regions, merely affected by harsh working occasions as well. Employed by an import 515nm green laser diode within 5mW to 100mW and higher power up to 150mW to 200mW, and basic use of a metal heat sink cooling system inside a durable anodized aluminum alloy housing tube with different dimension, this green dot laser alignment always gets sufficient space leaving for tube heat dissipation, and achieves ultra stable and reliable green light and green reference dot projection as long as 24 hours per day. There is also no light decay or blur in continuous use.
Usually 515nm green light is close to the most sensitive wavelength of the human eye, several times brighter than red light, 515nm green laser diode module is allowing clear visibility even in bright workshop lighting and with high metal reflectivity. Featured by high positioning accuracy, small spot size, and a small divergence angle in the dot-shaped laser, it is preventing light diffusion over long distances, making it suitable for long-distance alignment and high-precision positioning. Besides the adoption of a qualified glass coated lens, this green dot laser alignment also gets special use of adjustable focus optic lens in front of beam aperture. Once highly powerful and intense green light is concentrated from beam aperture, it is converting into an increasing accuracy and brightness green reference dot generation at greater distance and multiple higher lighting workshops.
Usually 515nm semiconductor green laser diode module generates little heat and can be continuous lit for 24 hours, which is suitable for long-term online machine tool use. Featured by shock resistant and oil resistant, it is always suitable for harsh workshop environments, without a fragile crystal structure. It is more durable than traditional 532nm green lasers and less prone to damage from machine tool vibrations. Typically this 515nm green dot laser alignment adopts DC power supply with 5V, 9V or 12V, supports TTL modulation, can be directly connected to the machine tool control system for linkage switching. It always provides a high precision, high visibility an d high duration used in machining, specifically designed to quickly and accurately mark the center point of drilling, welding, cutting, and tool setting.
High Precision Alignment 532nm Green Laser Line Generator in Textile Processing Machinery
When highly precise and fine line alignment is seriously in need for textile processing works, not easily relying on any prior line drawing or printing work, it would be a much better solution to apply a highly intense light emitted tool of a 532nm green laser line generator. 532nm green light is standing the middle part of all visible optical spectrum, which is clearly visible on dark patterned, and reflective fabrics, making it easier to identify than red light and unaffected by fabric texture. After its correct use of output power and optic lens fan angle, and proper integration with textile processing device or machinery, this 532nm green laser module allows high precision, high speed and noncontact line positioning results for all textile processing works conveniently.
Compared to a formal alkaline battery power source supported green laser pointer, the usual use of a 532nm green laser line generator enables long term lasted green light and green reference line projection from beam aperture. It gets wide range output power of 5mW to 100mW and higher power up to 150mW to 200mW. Being made with a special design part of a metal heat sink cooling system inside a durable anodized aluminum alloy housing tube, and special use of separate cooling system for higher power green line laser alignment, it gets sufficient space leaving for tube heat dissipation and thermal conductivity, achieves even more stable and reliable green reference line projection onto multiple working surfaces.
Being made with a qualified glass coated lens within 10 to 110 degree fan angles, together with adjustable focus optic lens inside a durable metal housing tube, 532nm green laser line generator emits high linear quality and highly straight green reference line within 0.5 meter to 6 meters lengths in distance. Equipped with low laser beam divergence and special TEM00 laser beam mode, and freely adjusted green reference line thickness, it gets highly fine green line projection within 0.3mm at 10cm distance, 1mm to 2mm fineness at 2 meters distance. The straight green alignment laser lines are distortion-free, suitable for high-precision alignment of thin and multi-layered fabrics, improving finished product yield. Without any effect by moisture, dust, rain, water or fog, it makes good job for long term continuous and stable operation, with low temperature drift and long lifespan. It can be directly installed on various textile equipment, is easy to adjust, has low modification cost, and is highly versatile.
Applications in textile processing industry:
Fabric Inspection Machine/Rolling Machine: highly fine green laser line is used as a baseline for detecting fabric straightness, quickly identifying fabric skew, weft skew, and wrinkles for timely correction.
Fabric Laying Machine/Laying Machine: 532nm green laser line generator provides an alignment baseline, ensuring neat and even laying of multiple layers of fabric, improving cutting accuracy.
Cutting Machine/Cutting Bed: Serves as a cutting positioning line, used for manual or automatic cutting with reference to the light, reducing off-center cutting and waste.
Sewing Machine/Quilting Machine: Assists in fabric alignment, ensuring straight and uniform seams.
Slitting Machine/Cutting Machine:532nm green laser line generator is used for positioning during the slitting of fabrics, webbing, non-woven fabrics, etc., ensuring consistent slit width.
Printing Machine/Flocking Machine: Provides a printing alignment baseline, ensuring accurate and non-offset pattern placement. Equipment for Towel, Home Textiles, and Non-woven Fabrics: Straight-line positioning and alignment in cutting, sewing, and folding processes.
Applications of 532nm Green Laser Diode Module in Dot Positioning with The Construction Industry
Whenever advanced 532nm green DPSS laser tech is applied for a practically used dot measuring tool, it is created into a professional dot aligning tool of green laser diode module. It always gets constant power source supply and proper equipment with construction industry field used machine or device. It projects 532nm green laser light with high human eye sensitivity, visible from a distance far exceeding red light in daylight and sunlight. This green dot laser alignment is suitable for building construction layout, steel structure installation, curtain wall dry hanging, and decoration benchmark positioning.
Available with wide range output power of 5mW to 200mW and basic use of a metal heat sink cooling system inside a durable anodized aluminum alloy housing tube, this 532nm green laser diode module is offering strong visibility under strong outdoor light, precise positioning, and good environmental adaptability, significantly improving construction accuracy and efficiency. It is an ideal indicator light source for efficient positioning in modern construction engineering. For the most important of all, owing to its low laser beam divergence and special TEM00 laser beam mode, 532nm green dot laser alignment always keeps work with the most compact size and the brightest green reference dot projection at various work distances conveniently.
Based on the adoption of a qualified glass coated lens and adjustable focus optic lens in front of beam aperture, this 532nm green laser diode module not only gets highly powerful and concentrated green laser light emission at several miles far away, but also enables easy converts into a small, concentrated, and non diffuse light spot, maintains a small dot even at long distances, meeting building axis and benchmark positioning requirements. When green dot laser alignment is applied for various building surfaces, green reference dot is clearly visible on concrete, stone, steel, tiles, dark walls, and glass, without being obscured by the background color.
Under multiple construction works, 532nm green laser diode module projects noncontact, non damaging, and non contaminating dot indication, does not affect subsequent construction. It allows freely equipped DC power supply or TTL modulation power supply, which enables long term lasted green dot generation over long term use. After quite simple installation or integration with construction machine or device, it significantly improves construction efficiency, eliminating the need for manual stringing, plumb bobs, and repeated checks. A single person can quickly locate the target, saving labor and time.
Applications in construction fields:
Marking Center Points for Walls, Beams, Columns, and Door/Window Openings during Construction: 532nm green laser diode module replaces traditional chalk lines and markers for higher accuracy.
Positioning for Steel Structures: Locates and positions steel columns, beams, and embedded parts, ensuring precise welding and bolt installation.
Positioning for Curtain Walls/Dry-Hanging Stone: Indicates the hole positions of hanging components and the center points of keel installation, improving verticality and flatness.
Positioning for Interior Decoration: 532nm green alignment laser provides benchmark positioning for ceilings, tile laying, partition installation, and switch/socket positioning, unifying benchmarks and reducing errors.
Long-Distance Indication of Control Points, Axis Endpoints, and Elevation Control Points for Foundation Pit and Surveying Layout.
Bridge/Tunnel Construction: Positioning of formwork, reinforcement arrangement, and alignment of lining pouring center points.
Aluminum Alloy/Door/Window Installation: Provides rapid indication of window frame center lines, horizontal points, and vertical points.
A Brief Introduction of 532nm Green Laser Line Generator in Metal Sheet Processing
What is a good job for engineers to make ultra clear and fine line indication for all metal sheet processing works? Either it is pointing at long distance or high lighting ambient workshop occasions, it would be a good job for engineers and factory workers to operate a highly bright light emitted tool of a 532nm green laser line generator. It projects the brightest and the most sensitive color green light to the naked eyes, after cooperation with a qualified optic lens with different fan angles and constant power source supply, it is working well with a high precision, visualized straight line reference for metal sheet processing. This green line laser module is projecting good guidance line on high reflectivity metal surfaces such as steel, aluminum, and copper, which provides clear, interference-resistant line markings, offering precise positioning for cutting, bending, welding, and stamping processes. It replaces traditional marking tools, improving processing consistency and efficiency.
Compared to manual line drawing or printing works, the usual use of a 532nm green laser line generator always adopts an AC/DC adapter, thus it is able to make continuous green light and green line projection from beam aperture. Being made with advanced 532nm green DPSS laser tech within 5mW to 200mW output power, the visual sensitivity of 532nm green light is far higher than that of red light. On highly reflective metal surfaces such as stainless steel and aluminum plates, green laser line line markings remain clear and conspicuous. Even under strong workshop lighting and welding arc light interference, operators can quickly identify them, solving the pain points of traditional marking on metal surfaces where they are easily blurred or illegible due to reflections. When green line laser module gets correct selection of output power and optic lens fan angle, it enables high positioning accuracy and improving processing quality for multiple raw material processing works.
Being made with a qualified glass coated lens within 10 to 110 degree fan angle and adjustable focus optic lens design, when 532nm green laser line generator gets freely adjusted green line thickness and line emitting direction, this industrial grade module has a straightness error ≤0.1mm/m, and the line width can be controlled between 0.5~2mm, meeting the precision requirements of sheet metal processing. The high collimation design ensures the straightness of the markings over long distances (within 5 meters), effectively reducing defects such as cutting skew and bending misalignment, and improving the product yield of metal sheet processing. This green line laser module also bears vibration, high temperature radiation, making it suitable for the high-speed operation and harsh working environments of cutting and bending equipment.
Applications in material sheet processing:
Sheet Cutting Marking: 532nm green laser line generator projects a straight-line cutting reference line for plasma cutting machines, flame cutting machines, and shearing machines. It marks the cutting path of long plates, ensuring straight edges for batch cutting of thick and thin plates, reducing subsequent grinding processes.
Bending Positioning Assistance: Bending line marking for bending machines and edge bending machines. It accurately marks the bending position and angle reference of metal sheets, avoiding bending deviations and ensuring the forming accuracy of chassis, shelves, and sheet metal parts.
Welding Splicing Alignment: Green alignment laser is applied for a baseline for laser welding and arc welding, assisting in the precise butt joint of two or more metal plates, ensuring uniform weld gaps and flush splice edges, thus improving welding yield.
Punching and Marking Positioning: A baseline for hole arrangement on punch presses and drilling machines, as well as a pre-marking baseline before CNC machining, providing a clear positional reference for automated or manual processing.
Scientific Research Work of Glass Coated Lens 532nm Green Laser Diode Module
When 515nm wavelength laser diode is applied for the creation of a green laser diode module, it is always projecting the most sensitive green light to the naked eyes, with brightness far exceeding that of red and blue light at the same power. It applies an import 515nm green laser diode and a qualified optic lens inside a durable housing tube, which is also equipped with thermal emitting system. When green dot laser alignment gets constant electric power supply and proper installation or integration into scientific experimental device or equipment, it enables easy reaching, noncontact and highly precise green dot projection. It also remains clearly visible in both low-light and high-light experimental environments, facilitating experimental observation and real-time calibration, and reducing visual errors.
Being made with a qualified glass coated lens and glass window design in front of laser beam aperture, not affected by moisture, dust, rain, water or fog, this 515nm green laser diode module is keeping work with high transmittance and high photoelectric ability forest green light emission at long extending distance. When it gets highly powerful green light concentrated, it can convert into increasing accuracy and good round shape green dot projection in distance easily. It keeps work with stable energy output without drift, fully meeting the core requirements of scientific research experiments for ultra-precise positioning and light source stability, ensuring accurate experimental data. When 515nm green dot laser alignment gets low laser beam divergence, cooperated with adjustable focus optic lens, it is adopted to experimental needs of different precision and scenarios, featured by good light concentration, allowing for switching of working modes as needed, adapting to various experimental schemes.
Usually 515nm green laser diode module gets quite small size tube diameter, which is designed with 16mm, 18.9mm and 26mm diameter for different output power range of 50mW to 200mW. Within the lowest power consumption and low heat generation, it is allowing for flexible integration into various scientific instruments and experimental platforms. It is compatible with different brands of detection and observation equipment, and modification and debugging are convenient without interfering with the overall operation of the experimental device. Owing to its pure light output, 515nm green dot laser alignment causes no additional damage to experimental samples, and will not interfere with the acquisition of other experimental data such as spectral analysis and electrical signal acquisition, ensuring the purity and traceability of experimental results.
Applications in scientific research fields:
Core Applications in Optical Experiments: As a visible light reference source, 515nm green laser diode module is used for optical path calibration, performance testing of optical components, and is suitable for basic optical experiments such as laser transmission, interference, and diffraction. It can also assist in building optical measurement systems.
Physics Research Scenarios: In mechanics experiments, it serves as a reference point for calibrating object displacement and marking motion trajectories; in thermal and electrical experiments, it assists in precise equipment alignment; and it is a core excitation and detection auxiliary light source for quantum physics and optical sensing experiments.
Materials Science Research: It serves as a precise positioning point for material microstructure analysis and surface property testing. It assists electron microscopes, spectrometers, and other equipment in focusing the area to be tested; and it marks monitoring points in material modification and weather resistance testing to achieve long-term tracking observation.
Biology and Life Sciences: 515nm green alignment laser serves as a positioning marker for biological sample observation. It tracks points during microbial culture, which is suitable for microscopic observation and sample sampling positioning, with low power and no damage.
Good Beam Quality 532nm Green Laser Diode Module For Industrial Marking Work
Whenever the advanced 532nm green DPSS laser tech and a qualified glass coated lens are configured with a highly durable metal housing tube, it is manufactured into a professional dot measuring tool of a 532nm green laser diode module. It projects highly bright and visible green laser light from a middle wavelength of 532nm green DPSS laser system, owing to its low laser beam divergence and special TEM00 laser beam mode, either it is used for close or long distance, green dot laser alignment maintains ultra compact size and highly bright green reference dot projection. High density green laser light is converted into increasing accuracy and brightness green reference dot, which fulfills high stability, high accuracy dot generation for all precise machinery processing works constantly.
Being made with an AC/DC adapter, not spending extra time on battery change, 532nm green laser diode module enables long term lasted green dot projection, unaffected by increasing temperature and serious electric current impact as well. When it applies a qualified glass coated lens and adjustable focus optic lens in front of laser beam aperture, equipped with an inner metal heat sink cooling system inside a durable anodized aluminum alloy housing tube, green dot laser alignment enables long term continuous green dot projection, resulting in minimal power drift and a low failure rate over long-term use. Combined with APC, ACC driving circuit board, whatever output power it is selected, it keeps work with high beam stability and long serving lifetime for all precise dot positioning works.
According to the adoption of 16mm, 18.9mm and 26mm diameter metal housing tube design, together with electric wires extension for both of 532nm green laser diode module and DC power supply, it allows for easy integration into CNC engraving machines, fully automated marking production lines, and other equipment. Highly bright green laser light forms high contrast marking on materials, such as red and orange plastics, facilitating subsequent quality inspection and traceability. Compared to infrared lasers of the same power, green alignment laser light has stronger visibility, requiring no additional auxiliary equipment during debugging, and operation safety can be ensured by using safety goggles.
General applications in medical treatment field:
Non-metallic Material Marking: 532nm green laser diode module is suitable for white, transparent, flexible plastic parts in the medical field, such as infusion set interfaces and medical catheters; also suitable for plastic casings of 3C products, acrylic decorative parts, and logo marking on wooden crafts and leather bags.
Metallic Material Marking: For highly reflective precious metals such as gold and silver, it can accurately mark item serial numbers and purity indicators; it can also be used for parameter marking on metal parts such as automotive parts and industrial bearings, avoiding reflection affecting the marking effect.
Special Material Marking: green dot laser alignment is suitable for glass products, such as production dates on mobile phone screens and automotive glass, and parameter marking on optical lenses; it is also suitable for fine marking of electronic components such as integrated circuit chips and PCB boards, and can also be used for traceability marking of fragile foods such as eggs.