Whenever highly precise and clear dot indication is in need for laser marking works, not able to rely on a simple red laser pointer or other manual dot projecting tool, it would be a much better solution for engineers and factory workers to operate a highly intense and bright beam emitted tool of a 650nm red laser diode module. It is not simply projecting the similar red laser light and red reference dot as a red laser pointer, but also getting even better thermal emitting, thus it achieves long term lasted red light and red dot indication from beam aperture. When red dot laser alignment gets proper use of output power and operating voltage electric power source, not limited by long distance or high height, it always brings users easy reaching, good direction and noncontact red dot alignment onto multiple working surfaces conveniently.
Basically 650nm red laser diode module gets easy connects with an AC/DC adapter, accepting wide range electric current of 100V t 240V, thus it is applicable for various working environments. Usually 650nm red light has a high absorption rate on non metallic materials, resulting in excellent marking efficiency and the ability to form clear marks without high power. Employed by an import 650nm red laser diode within 5mW to 100mW and high power up to 150mW to 500mW, and a metal heat sink cooling system design inside a durable anodized aluminum alloy housing tube, this direct diode emission made red dot laser alignment just gets sufficient space leaving for tube heat dissipation, and achieves increasing stability and brightness red light and red dot indication in long term use. It also gets no effect by overheating and over current impact as well.
Cooperated with adjustable focus optic lens and a qualified glass coated lens inside the durable anodized aluminum alloy housing tube, 650nm red laser diode module keeps work with highly powerful red laser light concentration, and efficient conversion of increasing brightness and accuracy red dot projection at longer distance and higher lighting working occasions. The focused red laser dot can reach a diameter of tens of micrometers, providing high marking precision and meeting the requirements for marking tiny characters (≥0.1mm). Owing to its ultra compact size and lighting weight design, this red alignment laser is easily integrated into any small marking machines, resulting in low low hardware costs and suitability for entry-level marking equipment.
Applications in laser marking works:
Non-metallic Material Marking: Red laser light is easily absorbed by non-metallic materials such as paper, leather, wood, acrylic, and plastics (ABS/PP), forming clear, shallow marks (e.g., logos, production dates, QR codes).
Micro-marking of Small Electronic Products:650nm red laser diode module is marking earphone shells, data cable interfaces, and the surface of miniature sensors, meeting the precise marking needs of small workpieces.
Marking of Flexible Materials: Fabrics and silicone products, avoiding material deformation at low power, achieving non-destructive marking.
DIY Handmade/Cultural Creativity Marking: Personalized custom jewelry and stationery engraving, with a low operating threshold, suitable for small desktop marking machine scenarios.
Tag: red dot laser alignment
High Positioning Accuracy Glass Coated Lens 660nm Red Laser Diode Module
Unlike the use of a simple laser pointer only used for temporary dot positioning work, in order to make long term lasted dot positioning works for various industrial positioning fields, it has become a major trend for engineers and factory workers to apply a highly intense beam emitted tool of a 660nm red laser diode module. It gets constant electric power source supply and proper integration into any industrial device or equipment. Basically it applies an import 660nm red laser diode and a qualified optic lens inside a durable housing tube, either it is pointing at close or long distance and ambient lighting occasions etc, this direct diode emission made red dot laser alignment enables high precision, good direction and high stability red dot generation onto multiple working surfaces.
This 660nm red laser diode module emits the similar red laser light and red dot emission as a red laser pointer, however, it should have to make even longer time dot indication in various dot positioning works. It applies an import 660nm red laser diode as its beam emitting source. Owing to its mass production and mature laser diode tech development, it is not only supporting long term lasted red dot projection, but also getting quite low production cost. No matter red dot laser alignment is used for industrial or high tech precise dot positioning work, it always gets wide applications and enables high stability dot generation for multiple application fields, including laser marking, laser engraving, drilling system, high tech and lab experiment work etc.
Cooperated with a qualified glass coated lens and adjustable focus optic lens, whenever it gets highly powerful and intense red laser light concentration, this 660nm red laser diode module enables immediate red light source concentration, and converts into increasing accuracy and brightness red reference dot projection at different work distances. The red reference dot is clear and sharp, with positioning deviation controllable within millimeters. This red dot laser alignment makes high penetration red laser light emission from beam aperture, as a result, even though it is used in bright sunlight and dusty environments, it remains clearly visible red reference dot projection, and is not easily affected by interference. Owing to its ultra compact size tube design, it enables easy integration and convenient maintenance, which can be directly embedded in equipment, and has a long service life, eliminating the need for frequent replacements.
Applications in industrial dot positioning works:
Machinery Equipment: Serves as a positioning reference point for cutting and welding processes, assisting in workpiece positioning calibration.
Automated Production Lines: 660nm red alignment laser provides precise coordinate references for processes such as robotic arm grasping and PCB board assembly.
Warehouse and Logistics Equipment: Works with sensors to provide path guidance for goods sorting and shelf positioning.
Assistance Work of 635nm Red Laser Diode Module In Laser Marking Work
What is a good solution for engineers and professionals to make ultra clear and precise dot indication for all marking works? It is not workable at all to only rely on a simple red laser pointer or manual dot projecting work, it would be a much better solution to apply a high purity light emitted tool of a 635nm red laser diode module. It applies an import laser diode and a qualified optic lens inside a durable metal housing tube, together with its constant electric power source supply and easy installation or integration into any industrial marking device or equipment, this accessory part of red dot laser alignment enables good direction, quick response and high precision red dot indication onto multiple working surfaces conveniently.
Usually 635nm red laser diode module adopts an AC/DC adapter electric power source, accepting wide range electric current of 100V to 240V, thus it is applicable in multiple regions and districts. It applies an import 635nm red laser diode within 5mW to 100mW and 150mW to 500mW as its beam emitting source, equipped with a metal heat sink cooling system inside its durable anodized aluminum alloy housing tube, this red dot laser alignment gets larger space leaving for tube heat dissipation, and achieves ultra stable red light and red reference dot projection as long as 10 hours per day. Within the lowest time consumption, it can quickly completes workpiece pre-positioning, eliminating the time spent on manual marking and repeated adjustments. Preparation time for marking a single workpiece is reduced by more than 60%, improving the overall production line cycle time.
When 635nm red laser diode module gets correct output power and proper adjustment of both laser beam focus and dot emitting direction, its precisely focused red dot provides a clear positioning benchmark, effectively reducing alignment errors caused by manual placement. Auxiliary positioning accuracy can reach ±0.1mm, reducing scrap rates. Owing to its matured laser diode tech and low production cost, it can be directly integrated into various new and old laser marking equipment without significant equipment modifications, resulting in low investment and quick returns. Red dot laser alignment also maintains stable red light visibility in the strong light and dusty environments of the marking workshop, and has good adaptability to various marking materials such as metal, plastic, glass, and leather, unaffected by workpiece color.
General applications in laser marking fields:
Marking Area Pre-positioning: 635nm red laser diode module is projecting red dots before marking quickly calibrates the marking center, corner reference points, or boundary contour reference points, assisting operators in accurately placing workpieces at the marking station, replacing manual line marking.
Multi-station Splicing Marking Guidance: For segmented marking of large workpieces and multi-pattern combination marking, red dots mark the splicing reference points of adjacent marking areas, ensuring no misalignment or repetition at the splicing points, improving overall marking accuracy.
Tooling and Fixture Calibration Assistance: Regularly using red alignment laser dots to calibrate the positioning accuracy of the marking machine’s tooling and fixtures, verifying fixture offsets, and making timely adjustments to ensure consistency in batch marking.
Vision System Linked Marking: Linked with the marking machine’s vision positioning system, the red laser dot serves as an auxiliary target for visual recognition, improving the positioning efficiency and recognition accuracy of the vision system for reflective, dark-colored, and small-sized workpieces.
High Visibility 650nm Red Laser Diode Module For Industrial Processing Use
Whatever kind of working surfaces users are in need of seriously accurate and bright dot indication in those of industrial machinery processing works, not able to rely on any prior dot positioning work with any manual or mechanical dot aligning tool, it would be a much better solution to apply a highly bright and intense beam emitted tool of a 650nm red laser diode module. It applies an import 650nm red laser diode and a qualified optic lens inside a durable metal housing tube, the projected red laser light gets featured advantages of high red light visibility, clear visual recognition in normal temperature industrial environment. When red dot laser module makes correct use of output power and proper installation or integration into industrial machine or equipment, it enables ultra clear, no glare and no mistake dot measurement onto various working surfaces conveniently.
When dot measuring work is processing in various industrial machinery processing works, 650nm red laser diode module is required to generate different dimension red reference dot onto different working surfaces. It applies an import 650nm red laser diode within 5mW to 100mW and high power up to 150mW to 500mW as its beam emitting source. Usually it is designed with with an internal metal heat sink cooling system inside a durable anodized aluminum alloy housing tube, which is achieving superior nice heat dissipation and ultra stable red dot generation as long as 10 hours per day. Whatever output power it is selected, red dot laser alignment still maintains low energy consumption and low heat dissipation, thus high power version is suitable for long distance dot positioning works effectively.
According to proper use of a qualified glass coated lens and glass window in front of laser beam aperture, whatever kind of working surface it is pointing, this 650nm red laser diode module still keeps work with high transmittance and high photoelectric ability red laser light generation, and converts into increasing brightness and accuracy red dot projection at greater distance of 25 meters and multiple high lighting environments as well. In various industrial precise dot positioning works, red alignment laser dot diameter gets less than 2mm at 10 meters, high positioning accuracy and high stability, unaffected by dust and slight oil contamination as well. Without spending extra time on prior manual or mechanical dot positioning work, it always enables reduced error and improved work efficiency for all precise dot positioning works.
Within the lowest time consumption and the lowest manual labor force input, 650nm red laser diode module always makes sure of simple operation, low maintenance cost, and adapted to low- to mid-range processing equipment. It is compatible with various processing materials such as metals (steel, aluminum), plastics, and wood, requiring no adaptation to special workpiece surfaces.
General applications in industrial processing works:
Metal/Non-metal Processing Positioning: Precise calibration of processing points on CNC lathes, milling machines, and cutting machines
Welding Auxiliary Alignment: Pre-positioning of weld seams and workpiece fitting calibration for laser welding and arc welding
Mold Processing Alignment: Alignment of cavity points and processing path guidance for injection molds and stamping dies
Automated Production Line Positioning: Precise point marking for workpiece gripping and assembly stations on assembly lines
High Stability Use of 635nm Red Laser Diode Module For Medical Assistance
What is an efficient job to make ultra clear and precise dot indication in medical treatment and surgery works? It might be processing at various work distances, however, the operation of 635nm red laser diode module has just changed the situation. It applies an import 635nm red laser diode and a qualified glass coated lens inside a durable housing tube, cooperated with its constant electric power source supply and proper integration with medical treatment device or equipment. When it gets correct use of output power, the core functions of a 635nm red dot laser alignment in medical assistance is to serve as a low-risk, highly visible optical indicator tool, providing a precise visual target for diagnostic and treatment procedures, helping doctors locate lesions, mark operating areas, or calibrate medical equipment.
The genuine use of a 635nm red laser diode module applies an AC/DC adapter as its electric power source, which is required to make long term lasted red laser beam emission at several miles far away. Being made with an import 635nm red laser diode within 5mW to 100mW and high power range of 200mW to 500mW, either adopting inner or separate cooling system, together with its durable anodized aluminum alloy housing tube design, this direct diode emission made 635nm red dot laser alignment achieves excellent heat dissipation, and ultra stable and clear red dot projection as long as 10 hours per day.
In practical laser medical treatment works, based on the selection of output power within 0.5 to 5mW Class IIIa 635nm red laser diode module, under normal use, it will not burn the skin or damage mucous membranes. Red light has extremely low penetration into human tissue (only the epidermis), eliminating radiation risks and allowing direct localization on or within the human body. When it gets low laser beam divergence of less than 1mrad and special TEM00 laser beam mode, this qualified glass coated lens made 635nm red dot laser alignment enables the most compact size and the brightest red reference dot projection.The red dot remains clear and sharp under operating room shadowless lamps and standard treatment room lighting. Doctors can quickly identify the location point with the naked eye, eliminating the need for complex imaging equipment and avoiding delays in operation. In addition, it always allows for easy integration into medical devices such as endoscopes, dental handpieces, and surgical navigation systems.
General applications in medical assistance works:
Dental Diagnosis and Treatment Assistance: During fillings, root canal treatments, or tooth cutting, the red dot marks the area of caries and the reference line for polishing, helping the surgeon precisely remove diseased tissue and avoid damaging healthy tooth tissue.
Surgical Positioning: For example, during small dermatological tumor removal and plastic surgery suturing, the red alignment laser dot marks the incision location or suture alignment point. In neurosurgery, it assists in calibrating the relative position of surgical instruments and lesions (requires integration with an image navigation system).
Medical Equipment Calibration: During routine calibration of ultrasound probes and laser therapy devices (such as freckle removal devices), the 635nm red laser diode module serves as a reference point to ensure that the device’s emitted energy and detection area are precisely aligned with the target location, preventing treatment errors.
Rehabilitation therapy assistance: During sports rehabilitation training, red dot laser alignment tool can mark the joint trajectory points where the patient needs to move (such as the knee flexion and extension benchmark), helping patients complete rehabilitation movements according to the precise path and improve training effects.
General Use of 635nm Red Laser Diode Module in Medical Assistance
Whatever kind of working surface users are trying to make ultra clear and precise dot indication, in those of medical treatment and therapy fields, it is a good job for operators to select a high purity and high brightness device, such as a 635nm red laser module. Under normal lighting conditions in medical environments, the red laser dot is clearly visible, facilitating operation and positioning by medical staff. The 635nm wavelength matches the frequency of healthy human cells and is easily absorbed by human tissue, producing a positive biostimulatory effect with minimal damage. Whenever red dot laser alignment gets correct use of output power and operating voltage electric power source, it enables easy reaching, highly precise and clear red dot indication for all medical treatment works effectively.
Inside the durable anodized aluminum alloy housing tube, 635nm red laser diode module adopts advanced 635nm red laser diode and driving circuit board. It applies an import 635nm red laser diode within 5mW to 100mW and high power up to 150mW to 500mW, which is equipped with a metal heat sink cooling system inside. It gets superior nice heat dissipation and ultra nice laser beam stability. Under operation of different operating conditions, 635nm red dot laser alignment maintains consistent output power and red dot shape. It is less susceptible to spot drift or brightness decay during continuous operation. This red dot laser alignment is allowing users to select the appropriate power level based on the specific medical application requirements, meeting a wide range of scenarios, from low-intensity positioning assistance to high-intensity treatment.
On consideration of long term and easy dot indication, on the basis of real output power, 635nm red laser diode module is designed and manufactured with proper tube diameter of 16mm, 18.9mm and 26mm, which can be easily integrated into various medical devices without taking up too much space, contributing to the miniaturization and portability of medical equipment. This red dot laser alignment provides excellent thermal conductivity, effectively dissipating heat generated by the laser diode and ensuring module stability during extended operation. Every time this low beam divergence red laser gets proper installation or integration to correct position, it just ensures excellent focus and high positioning accuracy, meeting the precise positioning requirements of the medical field.
Applications in medical therapy assistance:
Wound Repair: 635nm red laser diode module can penetrate the skin 1-2mm deep, acting on mitochondria, increasing cellular ATP synthesis efficiency, stimulating fibroblast proliferation and collagen reorganization. It can be used to repair wounds such as postoperative incisions, diabetic ulcers, and burns, accelerating healing and reducing scarring.
Acupuncture Targeting: This wavelength of red alignment laser light has a similar frequency to healthy cells and is easily absorbed by the body. It can help doctors accurately locate acupuncture points, improving the accuracy of acupuncture treatments.
Skin Treatment: In the field of skin beauty, it can be used to treat inflammatory skin conditions such as acne. 635nm red light can destroy Propionibacterium acnes, reducing acne formation, improving skin sensitivity, and repairing damaged skin barriers.
Medical Device Positioning: small size red dot laser module can be integrated into medical devices such as MRI scanners, CT scanners, X-ray fluoroscopy, and C-arm X-ray machines for accurate physical positioning and surgical location indication.
How Can 650nm Red Laser Diode Module Be Applied For Multiple Industrial Fields?
Whenever 650nm red laser diode tech is applied for the creation of a real dot measuring tool, not simply made into a red laser pointer, it is manufactured into a much more practically used device, such as a 650nm red laser diode module. The wavelength of 650nm belongs to the red wavelength band. In daylight, indoors, and in low light environments, the human eye is more sensitive to it than infrared lasers. Any time it gets constant electric power source supply and proper integration with industrial device or equipment, 650nm red dot laser is projecting highly clear and easily identified red reference dot indication at various work distances, with no additional receiving equipment.
In practical precise dot positioning works, red laser diode module applies an import 650nm red laser diode as its beam emitting source. It gets long developing history and matured laser diode tech, owing to its long developing history, this direct diode emission made laser device has just got quite low production cost and highly stable red laser beam and red dot projection from beam aperture. In addition, comparing with higher power green or blue laser, the driving current is much lower, thus it is resulting in a lower overall module cost and suitable for high-volume commercial use. When 650nm red dot laser alignment tool applies an inner metal heat sink cooling system inside a durable anodized aluminum alloy housing tube, it is not only achieving superior nice thermal emitting, but also assuring ultra stable and clear red dot projection within long lasting time of more than 8 hours per day.
Being made with a durable anodized aluminum alloy housing tube, this 650nm red laser diode module is operated within wide range temperature of -10°C to 60°C), resulting in minimal light spot drift over long-term use and a lifespan of up to 10,000-30,000 hours. It also bears different humidity and mechanical moving, shaking in continuous use. Based on the use of a qualified glass coated lens and glass window in front of beam aperture, this diode emission made 650nm red dot laser enables high energy density and high transmittance red laser light emission, and converts into increasing brightness and accuracy red dot indication at even longer distance of 25 meters and multiple lighting occasions as well.
Based on its ultra compact size red reference dot projection with 1 to 5mm diameter at a distance of 1 meters, this 650nm red laser diode module also enables high level of dot positioning accuracy up to ±0.1mm. This meets the needs of non-ultra-high-precision applications such as industrial alignment and instructional guidance, but is not suitable for micron-level precision machining. On condition that it is selected with high power range up to 150mW to 500mW, unless its operation of sunlight, it also makes sure of ultra clear, precise and bright dot indication under high lighting occasions as expected. It is focusing on positioning, indication, and aiming scenarios. Its performance advantages lie in high visibility, low power consumption, and manageable costs, which is suitable for various devices with medium-precision requirements and requiring intuitive visual guidance.
Applications:
Industrial positioning: 650nm red laser diode module is used as a positioning reference for laser marking/cutting machines, material alignment in automated assembly lines, and target indication for machine tool processing.
Consumer electronics: Laser pointers (for teaching/demonstration), image calibration for projectors/laser TVs, and path planning marking for robot vacuums.
Security and targeting: Focus assist for surveillance cameras, aiming indication for toy guns/simulated shooting equipment, and area boundary marking for access control systems.
Medical assistance: Low-power red alignment laser can be used for acupuncture positioning and target guidance for skin treatments (must meet medical-grade power standards).
How To Operate Industrial Stabilized 650nm Red Dot Laser Module?
In order to make clear and precise enough dot alignment at various work distances, in those of industrial and manufacturing fields, a lot of engineers and professionals are preferring to operate a highly intense beam emitting device, such as a 650nm red dot laser module. It is applying an import 650nm red laser diode with different output power and different operating voltage electric power source. In various industrial precise dot measuring work fields, based on correct use of DC power supply and proper mounting onto industrial device or equipment, this red laser alignment makes sure of ultra clear, precise and stable dot indication onto various working surfaces conveniently.
Usually 650nm red dot laser module gets constant electric power source from an AC/DC adapter, which is able to work with long time lasting red dot projection onto different working surfaces. Owing to the special use of long wavelength of 650nm, after its mass production and basic use of thermal emitting system design, it just gets superior nice thermal emitting and ultra long time lasting red dot indication onto different working surfaces. When it gets quite low production cost, a lot of users would prefer to use it for various precise dot measuring works.
When a qualified glass coated lens is equipped in front of laser beam aperture, whatever kind of working surface it is pointing, this 650nm red dot laser module is generating high transmittance and high energy density red laser light source at several miles far away. Further more, being made with an adjustable focus optic lens, once highly powerful and highly intense red laser light is concentrated from beam aperture, this red dot laser alignment gets high efficiency conversion of increasing accuracy and brightness red dot projection at even longer work distance and higher lighting working environments as well.
In practical precise dot measuring works, based on the real work distance and lighting occasion, this 650nm red dot laser module allows correct use of output power and ultra clear red reference dot projection as long as 25 meters and multiple lighting occasions as well. It is operating easily and quickly, which also gets no limitation by thermal energy consumption and time consumption, and makes quite satisfied dot alignment and positioning results for all machinery processing works. When alignment laser up to 50mW to 100mW is operated for longer distance and higher lighting occasion, only after proper wearing of laser safety goggles and avoiding eye exposure to beam aperture, it just brings users no mistake and no danger use for all application fields effectively.
Noncontact Measurement Assistance of 650nm Red Dot Laser Module
When dot indication work is processing a longer work distance than formal hand reaching, a lot of users are still considering of the use of formal manual dot projecting work, however, it is just substituted by advanced laser diode tech applied device, such as a 650nm red dot laser module. It keeps work with highly visible and intense red laser beam emission from a 650nm wavelength. When it gets low laser beam divergence fan angles and basic use of a qualified optic lens inside a durable metal housing tube, configured with constant electric power source supply, this compact size tube made red laser device enables long time lasting, easy reaching, and high stability red dot indication onto various working surfaces conveniently.
Usually 650nm red dot laser module gets constant electric power source from an AC/DC adapter. In practical precise dot positioning work, it gets selected output power of 5mW to 100mW and high power up to 150mW to 500mW. After its basic use of a metal heat sink cooling system inside a durable anodized aluminum alloy housing tube, it always leaves larger space for tube cooling down, and enables long time lasting red reference dot projection within constant work time of 8 to 10 hours per day. It should only be selected with correct output power and operating voltage electric power source, thus red laser alignment makes sure of high stability and high precision dot measurement for multiple raw material processing works.
The special use of 650nm wavelength has just assured high sensitivity and high visibility red laser light source emission from an inner laser diode. Red laser light is easy to capture to human eyes, which is suitable for precise dot positioning in strong light environments, such as strong light interference scenes in workshops. Owing to its narrow wavelength, the finished product of red dot laser module is emitting stable wavelength, and strong anti-interference ability. It can adopt to vibration and temperature changes in industrial environments. Red reference dot is quite small and bright in long term use without any light decay or dim in proper use.
Based on the use of 12mm, 16mm and 26mm diameter metal housing tube design, this ultra compact structure made 650nm red dot laser module enables quite easy integration into automation equipment. Being made with anodized aluminum alloy housing tube design, it gets good thermal emitting and good performance of dustproof and waterproof. After its mass production, the finished product of a red laser alignment tool has just achieved quite low production cost and ultra long time lasting red dot projection for all precise machinery processing works.
Applications:
Industrial fields: mechanical processing dot positioning, such as machine tool setting, automated assembly line calibration, 3D scanning contour measurement.
Consumer electronics: red laser pointers (such as page turning pens), smart home devices (such as sweeping robot path assistance).
Medical/scientific research: biological experiment cell tracking, laser aiming (such as surgical assisted positioning).
Other scenarios: stage lighting effects, teaching demonstrations, etc.
Easy Used Economy Red Dot Laser Alignment
Whatever kind of working surface users are trying to make ultra clear and stable dot measurement, even though it is used fro those of long distance or long lasting use, it should be a quite nice job to operate a high density beam emitting tool of an economy red dot laser alignment. It applies advanced 650nm red laser diode tech, cooperating with a qualified optic lens inside a durable metal housing tube, any time it gets proper installation onto those of machine or device, this direct diode emission made 650nm red laser module just brings users quite nice dot aligning experience for all machinery processing works constantly.
Cooperating with advanced 650nm red laser diode tech, not simply into a red laser pointer, it has been created into a quite practically used device of an economy red dot laser alignment. It is applying an import 650nm red laser diode within 5mW to 100mW as its beam emitting source, which is able to work with increasing laser beam stability of at least 40%. in addition, in various industrial and high tech precise dot measuring work fields, owing to its special use of a durable anodized aluminum alloy housing tube, this 650nm red laser diode module just maintains ultra clear and stable red dot projection under multiple working occasion, including mechanical moving, shocking or calibration etc.
Being made with a qualified glass coated lens and a glass window in front of laser beam aperture, in any type of industrial and high tech precise dot measuring work fields, this economy red dot laser alignment is working well under harsh working occasion of moisture, dust, rain, water or fog etc. When it emits ultra high density and highly powerful red laser light source emission at long extending distance, unless it is pointing under sunlight, this moderate brightness 650nm red laser diode module is able to make ultra clear and precise dot indication for laser marking machine, laser engraving, drilling system, red laser sight, and lab experiment etc.
Being made with 16mm and 26mm diameter metal housing tube design, cooperating with electric wires extension, this economy red dot laser alignment enables quite easy carrying and quick reaching of red dot projection onto any vertical or horizontal surface. It is an industrial stabilized dot measuring tool, which always gets good dot alignment experience for those of labs, institutes and colleges. When this alignment laser is operating with high attention to thermal energy hurt to eyes, after proper wearing of laser safety goggles, it still assures easy, free and secured dot measurement for all working occasions.