August 2025 – High Power Blue, Green, Red, Infrared Laser Modules

What is The Multiple Use of Glass Coated Lens 515nm Green Cross Line Laser Module

In various type of industrial and high tech precise cross line measuring work fields, not able to rely on manual or mechanical cross line alignment tool, it should be a much better solution for engineers and professionals to operate a high energy density beam emitted tool of a 515nm green cross line laser module. It is working well with easy reaching, highly clear and fine two perpendicular green lines with accurate 90 degrees at long extending distances. Based on the use of correct output power and optic lens fan angle, and constant electric power source supply, not relying on any manual labor force input, this 515nm green laser module is able to provide ultra clear, fine and precise cross line indication for multiple raw material processing works conveniently.
The primary use of a 515nm green cross line laser module is a type of high visibility and high precision cross line measuring tool. It is approximately six times brighter than a typical red laser, providing a clearly visible crosshair both indoors and outdoors, making it easily identifiable even in bright light conditions. Usually it applies an import 515nm green laser diode within 5mW to 100mW and high power up to 150mW to 200mW as its beam emitting source. In those of long time lasted cross line alignment work, owing to its basic use of a metal heat sink cooling system and APC, ACC driving circuit board design, 515nm green cross laser alignment tool gets intelligent feedback control of electric current and output power supply, thus it enables high level of laser beam stability of up to 85% in continuous use, and long serving lifetime of more than 8,000 hours.
In order to meet various high precision cross line positioning and alignment requirement, this 515nm green cross line laser module is also equipped with adjustable focus optic lens in front of beam aperture. It projects a crosshair with precise straightness and verticality. After its easy screw of laser beam aperture part, after its immediate forest green laser light source concentration, it is converting into an increasing fineness and brightness two perpendicular green lines as long as 25 meters and other higher lighting occasions as well. Owing to its typical use of 16mm, 18.9mm and 26mm diameter metal housing tube design, this cross laser alignment tool allows easy installation in various equipment and instruments, minimizing space requirements.
Applications:
Construction: 515nm green cross line laser module can be used for horizontal and vertical positioning of walls and floors, helping construction workers more accurately perform tasks such as masonry, tile laying, and door and window installation, improving construction efficiency and quality.
Industrial Manufacturing: In machining and electronics manufacturing, it is used for equipment installation and commissioning, production line calibration, and component positioning and alignment, ensuring accuracy and consistency throughout the production process.
Laser Measurement: As a core component in measuring equipment such as laser rangefinders and self-leveling laser tools, it provides a clear crosshair reference, facilitating measurements of distance, angles, levelness, and other parameters.
Medical: 515nm green alignment laser can be used in laser medical technologies, such as surgical positioning and rehabilitation therapy, providing precise guidance for medical procedures.

Industrial Dot Alignment Work with 515nm Green Laser Diode Module

In those of industrial precise dot alignment work fields, on consideration of high level of accuracy and high precision dot indication onto different working surfaces, it would be a much better choice for users to apply advanced laser diode tech applied tool of a 515nm green laser diode module. It is primarily used to provide precise reference dot, helping to ensure high precision and consistency in various operations during industrial production. Based on its advanced use of an import 515nm green laser diode and a qualified glass coated lens inside a durable metal housing tube, only after its easy connects with electric power source and proper installation onto any other industrial machine or device, this direct diode emission made 515nm green dot laser alignment tool always makes sure of high precision, easy reaching and good direction dot indication onto various working surfaces conveniently.
The usual use of a 515nm green laser diode module applies a short wavelength of 515nm green laser diode, which emits similar green laser light as a 532nm green DPSS laser system. However, owing to its direct forest green laser light emission from its inner laser diode, equipped with inner metal heat sink cooling system and APC, ACC driving circuit board design, it enables even more stable and reliable forest green laser light emission in long time use. 515nm green laser light falls within the spectral range where the human eye is most sensitive. Even in bright light conditions, green laser dot can be clearly seen in industrial environments, facilitating accurate alignment and commissioning.
Being made with a qualified glass coated lens in front of laser beam aperture, cooperated with adjustable focus optic lens, this 515nm green laser diode module typically offers excellent beam quality and a small divergence angle, providing a very precise green reference dot beam spot. This enables high-precision dot alignment and positioning, meeting the stringent precision requirements of industrial production. Combined with adjustable focus optic lens in front of laser beam aperture, once 515nm green dot laser alignment gets immediate forest green laser light concentration, it also converts into an increasing accuracy and brightness green dot projection for both of longer distance and higher lighting occasions as well.
515nm green laser diode module utilizes an integrated design, resulting in a compact size that facilitates installation and integration into various industrial equipment. It doesn’t occupy excessive space, contributing to the miniaturization and compactness of industrial equipment. In practical precise dot measuring work fields, owing to the adoption of durable anodized aluminum alloy housing tube design, it bears wide range operating temperature, different humidity, and other harsh occasion of mechanical moving or shocking as well. It can operate stably in complex industrial electromagnetic environments, unaffected by external interference factors, ensuring accurate alignment and reliability.
Applications in industrial machinery processing fields:
Machining: During machining, 515nm green dot laser module can be used for tool setting on machine tools, providing precise positioning reference

points for the tool, ensuring the accurate relative position between the tool and the workpiece, thereby improving machining accuracy. Furthermore, during the assembly process, the dot laser emitted by this laser module can be used as a reference to ensure the precise installation position of each component.
Electronic Manufacturing: In electronics manufacturing, such as in the production of circuit boards, 515nm green laser diode module can be used for positioning and alignment. For example, during processes such as cutting and drilling circuit boards, a laser dot is projected onto the circuit board, providing a precise position reference for the processing equipment, ensuring accurate processing accuracy and quality.
Automated Production Lines: 515nm green alignment laser can be used for object position detection and alignment in automated production lines. For example, during product transport, the laser spot projection can be used to detect correct product positioning. Any deviations can be adjusted promptly to ensure smooth production line operation and consistent product quality.

Applications of 445nm Blue Crosshair Laser Module in Wood Processing

Whenever cross line projection work is processing for those of wood processing works, such as engraving, cutting, and positioning works etc, it would be a quite efficient job for users to operate a highly intense beam emitted tool of a 445nm blue crosshair laser module. The 445nm blue light has a short wavelength and a small beam divergence angle, enabling micron-level engraving accuracy. The sharp crosshair edges enable more detailed wood engraving patterns, straighter cut lines, and more precise positioning. Every time blue cross laser gets constant electric power source supply, after its proper installation or integration with industrial wood processing machine or device, it enables high precision, highly bright and fine two perpendicular blue lines generation with accurate 90 degrees at various work distances conveniently.
Owing to the special use of AC/D adapter, not spending extra time spending on battery change, this 445nm blue crosshair laser module gets no need to spend extra time on alkaline battery change. It applies an import 445nm blue laser diode within 50mW to 500mW as its beam emitting source. Owing to its shorter wavelength of 445nm, wood has a high absorption capacity for blue light, and 445nm blue lasers are effectively absorbed by wood. This generates sufficient heat in a short period of time, rapidly melting or vaporizing the wood, resulting in high processing efficiency. At the same power level, it can cut thicker wood than other wavelength lasers.
Being made with a qualified glass coated lens within 10, 15 and 110 degree fan angles and adjustable focus optic lens design inside a durable anodized aluminum alloy housing tube, this 445nm blue crosshair laser module always projects highly straight and fine two perpendicular blue lines with accurate 90 degrees and different dimensions. It generates different cross line lengths within 0.5 meter to 6 meters. When users are making easy screw of laser beam aperture part, after its immediate blue laser light concentration from beam aperture, this cross line laser module gets increasing accuracy and brightness blue cross line source at longer distance and higher lighting occasions immediately. The blue crosshairs remain clearly visible even on rough or textured wood surfaces, unaffected by the wood’s color and surface characteristics. This facilitates observation and alignment, and provides excellent visibility even in brightly lit environments, such as outdoors. The crosshair spot size and line width of some modules are adjustable, allowing for optimal marking dimensions tailored to varying wood processing requirements and adapting to diverse processing scenarios.
In practical precise cross line measuring works, this durable metal housing tube made 445nm blue crosshair laser module undergoes multiple reliability verifications and high-temperature, long-term aging tests. It also features superior heat dissipation design and protection circuitry, ensuring stable operation and a long service life in wood processing environments. After correct use of output power and optic lens fan angle, and proper installation onto wood processing devices, this blue alignment laser can be used for wood engraving, using software mapping, the blue alignment laser projects blue laser beam energy onto the surface of the wood workpiece, achieving precise and efficient ablation, engraving various patterns and text. In cutting, it provides precise cutting path guidance for wood cutting equipment, enabling it to cut wood within a certain thickness. For positioning, it can be used as a reference mark in applications such as wood splicing and furniture assembly, ensuring accurate positioning between wood components and improving processing accuracy and efficiency.

Industrial Line Alignment Work with 445nm Blue Line Laser Module

When high precision line indication work is in serious need in those of industrial precise machinery processing works, it is not simply relying on manual line drawing or printing work, but making an even better job with a high energy density beam emitted tool of a 445nm blue line laser module. Owing to its special use of a qualified optic lens and import 445nm semiconductor blue laser diode inside a highly durable housing tube, only if it gets constant electric power source supply and proper installation onto those of industrial device or device, this direct diode emission made blue laser line generator is able to project highly fine, straight and bright blue reference line, and providing a precise linear reference for industrial production and improving processing and measurement accuracy.
The basic use of an import 445nm blue laser diode enables wide range output power of 50mW to 100mW and high power up to 150mW to 500mW, thus 445nm blue line laser module is always designed with good thermal emitting system. It gets basic use of a metal heat sink cooling system and APC, ACC driving circuit board inside its durable anodized aluminum alloy housing tube. In practical precise line positioning works, it always gets excellent thermal conductivity and ultra stable blue line projection under multiple working environments, including wide range operating temperature, humidity and other mechanical moving or calibration as well. In process of long period lasting blue line projection work, blue laser line generator is able to maintain its stable performance and long serving lifetime in proper use.
According to quite easy screw of adjustable focus optic lens, 445nm Gaussian beam blue line laser module enables high speed blue laser light source concentration, and converts into increasing accuracy and fineness blue reference line at a long extending distances. In addition, according to its special design of 16mm, 18.9mm and 26mm diameter metal housing tube design, this ultra compact structure made laser line generator always enables quite easy installation and integration into various industrial equipment and makes sure of easy reaching, good direction and quick response blue line indication onto any vertical or horizontal surface immediately.
Applications in industrial fields:
Material Processing: 445nm blue laser line generator can be used for laser marking and cutting, marking and cutting on a variety of materials, including wood, acrylic, and leather. Its precise linear output enables fine pattern processing and high-precision cutting edges.
Alignment and Positioning: highly straight and bright blue alignment laser lines are commonly used in industrial production for equipment installation and commissioning, as well as for alignment and positioning during processing. For example, in woodworking machinery, stone processing machinery, and packaging machinery, they provide precise marking lines for material cutting, ensuring accurate cutting positions and improving production efficiency and product quality.
Laser Measurement: 445nm blue line laser module can be used as reference laser lines to measure object dimensions or distances. In conjunction with relevant measuring instruments, they can accurately measure parameters such as length, width, and height. They can also be used to measure geometric tolerances such as straightness and flatness. 3D Scanning and Modeling: In 3D scanning, a single cross-section of a target object can be captured at once, providing data support for robot positioning and component 3D model reconstruction, helping to quickly and accurately acquire three-dimensional information about the object.
Machine Vision: This alignment laser can be used as a light source in machine vision systems to help identify features such as edges and contours, assisting robots in precise grasping and sorting operations, or detecting product defects and dimensional deviations.

Industrial Machinery Processing Used 445nm Blue Line Laser Module

In those of industrial machinery processing work fields, the usual use of a 445nm blue line laser module is always operating as an accessory part for precision positioning and auxiliary alignment tool. It applies advanced semiconductor blue laser diode and a qualified optic lens inside a highly durable housing tube, which enables easy carrying, operation and clear line indication onto multiple working surfaces. Not seriously relying on manual line drawing work or professional skills, this laser line generator should only be selected with correct output power and optic lens fan angle. Within quite long extending distance and long operating period, it is able to provide operators clear, quick and easy reaching blue line indication onto multiple raw material surfaces conveniently.

When 445nm blue line laser module gets constant electric power source supply, owing to its ultra compact size and durable structure design, it is widely used in machining processes on lathes, milling machines, grinders, boring machines, and other equipment. It is used to mark machining reference lines, locate workpiece edges or contours, calibrate tool paths, and ensure machining accuracy. It applies an import 445nm blue laser diode within 50mW to 100mW and high power range of 150mW to 500mW, owing to its intense blue laser light emission directly from a laser diode, not as bright as a 473nm blue DPSS laser system, however, this blue laser line generator is able to be made with ultra compact size structure, and still maintaining ultra stable and clear blue line indication in long time work.

The usual use of a qualified glass coated lens enables highly fine blue line indication from a 445nm blue line laser module. It gets different blue line length within 0.5 meter to 6 meters, and low linearity error of less than 0.1mm per meter. It is equipped with adjustable focus optic lens, only after quite easy roast of laser beam aperture part, it enables freely adjusted blue reference line fineness and enables a micron-level reference for machining, reducing errors associated with manual visual alignment. It is particularly suitable for machining and positioning precision components such as gears, bearings, and precision molds.

Being made with durable anodized aluminum alloy housing tube, 445nm Gaussian beam blue line laser module obtains strong environmental adaptability, and provides high visibility on a variety of surfaces, including metal, plastic, and ceramics. The blue laser line remains clearly visible even in bright sunlight, oil, and dusty environments. Its interference immunity surpasses that of red or infrared lasers, preventing processing errors caused by blurred vision. Equipped with an APC/ACC driver circuit, blue laser line generator also provides stable output power, maintaining consistent laser line brightness and shape despite voltage fluctuations (100-240V) and temperature changes (-10°C to 60°C). Furthermore, its metal housing and enhanced heat dissipation design ensure it withstands mechanical vibration and long-term continuous operation (with a lifespan of over 10,000 hours).

Compared to traditional pre-processing methods such as scribing and proofing, the blue alignment laser line instantly projects positioning lines without contacting the workpiece, reducing auxiliary time. This allows for rapid workpiece alignment in batch processing, improving material changeover and processing efficiency. The optical design allows for adjustable laser line length (from a few centimeters to several meters) and angle, adapting to workpiece sizes (such as large plates and small precision parts) and processing scenarios (such as flat cutting and curved surface grinding). Owing to its ultra compact structure design, this blue laser line generator can be quickly secured to machine tool guideways, spindles, or worktables using brackets, magnets, or flanges, facilitating coordinated commissioning with processing equipment.

Textile Machinery Industry Used 405nm Violet Cross Line Laser Module

Whenever 405nm violet cross line laser module gets connects with an AC/DC adapter, not any longer spending extra time on prior cross line drawing or printing work, it just enables long time lasting violet laser beam and violet cross line projection from beam aperture. It gets no serious relying on manual labor force input and no serious limitation by work distance or operating lighting occasion etc. Being made with short wavelength of 405nm violet laser diode and a qualified glass coated lens inside a durable housing tube, it projects clear, straight and perpendicular crosshairs with high positioning accuracy, keeping errors within a narrow range and meeting the high-precision processing requirements of textile machinery.
The shorter 405nm wavelength has good absorption characteristics on some textile materials, and the purple light has high contrast on most textile fabrics, making it easy for workers to clearly see the crosshairs, even on darker colors or intricately textured fabrics. It applies a qualified import 405nm violet laser diode within 50mW to 100mW and high power up to 150mW to 500mW as its beam emitting source. Owing to its special use of a metal heat sink cooling system inside different dimension anodized aluminum alloy housing tube, typically 405nm violet cross laser alignment exhibits excellent power stability, enabling long-term continuous operation. The metal housing aids heat dissipation, maintaining laser output stability over extended periods of use and ensuring continuity and consistency during the textile processing process.
Available with different fan angles of 10, 15 and 110 degree and low laser beam divergence, this 405nm violet cross line laser module produces narrow and bright violet cross lines with high beam straightness, providing precise positioning references for various processing operations in textile machinery, helping to improve textile processing accuracy and quality. It makes precise cross line positioning and marking, which can reduce manual adjustment and calibration time, allowing workers to operate more quickly and accurately, thereby improving overall textile production efficiency and reducing production costs. Within the lowest production cost and high work efficiency, this violet cross laser alignment tool can ensure precision in cutting, sewing, and printing processes, reduces defective products caused by inaccurate positioning, and improves textile quality and consistency, helping companies enhance their product competitiveness.
Applications:
Cutting Positioning: When cutting fabric, the violet crosshairs projected by the 405nm violet cross line laser module serve as a cutting reference line, helping workers cut more accurately, ensuring accurate cut sizes, reducing fabric waste, and improving cutting efficiency and quality.
Sewing Alignment: During the sewing process, it can be used to guide fabric feeding and placement, ensuring that patterns and seams on the fabric are sewn according to preset positions. This ensures straightness and pattern alignment, improving the quality of garments and other textiles.
Printing Calibration: During textile printing, violet alignment laser helps calibrate the relative position of the printing plate and fabric, ensuring that the printed pattern is accurately printed in the designated location on the fabric, improving printing accuracy and consistency.

Industrial Stabilized Device of 405nm Violet Laser Diode Module

What is an efficient job to make clear and accurate dot indication at a longer work distance than formal hand reaching? It is not able to rely on a simple laser pointer or manual dot projecting work at all, but making even better job with a highly intense beam emitted tool of a 405nm violet laser diode module. It is widely used for a lot of industrial precise machinery processing work fields. The 405nm wavelength falls within the near ultraviolet range, with higher photon energy, allowing for focussing into a smaller spot size. It is suitable for high-precision inspection and micromachining. On condition that ultra compact structure made 405nm violet dot laser makes proper installation or integration with other industrial device or equipment, it enables easy reaching, highly precise and clear violet reference dot projection at a long extending distance constantly.
The real use of a 405nm violet laser diode module applies an import import 405nm violet laser diode within 50mW to 100mW and high power range of 150mW to 500mW as its beam emitting source, which is in need to make long time lasting dot projection work as expected. It applies an inner metal heat sink cooling system and APC, ACC driving circuit board inside a durable anodized aluminum alloy housing tube. Besides the adoption of a qualified laser diode, it is also coupled with high performance driving circuit board, which offers strong anti-interference performance, excellent consistency, and a long service life of more than 10,000 hours in use. When violet dot laser module is working together with other industrial device or instrument, it can work continuously within 8 to 10 hours per day, and still maintains ultra high laser beam stability of up to 85% in continuous use.
Typically 405nm violet laser diode module is made with ultra compact size tube, available with 16mm, 18.9mm and 26mm diameter for different output power range. It gets featured advantages of ultra-small footprint and high compatibility, which are easily integrated into various industrial equipment, convenient to use, and do not occupy excessive space. According to real work distance, 405nm violet laser alignment enables correct use of output power and equipped operating voltage DC power supply, it is suitable for high precision industrial dot measuring application fields greatly. The short wavelength excels in industrial applications requiring high precision, such as semiconductor photolithography, enabling high-precision line exposure and uniform exposure, meeting the high-precision requirements of microelectronic component manufacturing.
In addition, the practical use of a glass coated lens 405nm violet laser diode module is compatible with special materials. It offer excellent dot marking and curing performance for certain materials, such as some plastics, resins, and photosensitive resins, making them difficult to replace with other wavelengths. It also gets unique interaction with biomolecules and biomarkers, making it widely used in biomedical testing instruments. It can excite fluorescent markers, enabling the detection and imaging of biological tissues and molecules, playing a vital role in the R&D and production of medical devices.
Application in industrial precise machinery processing works:
Material Processing and Marking: 405nm violet laser diode module can be used for laser marking on some plastics, resins, and other materials, accurately engraving patterns, text, and other markings on their surfaces. It can also be used for photocuring. The 405nm wavelength can rapidly cure certain photosensitive resins, finding applications in 3D printing and UV ink curing.
Semiconductor and Electronics Manufacturing: 405nm violet alignment lasers play a key role in laser direct imaging (LDI) equipment used in industrial PCB production. Their high power output enables submicron exposure accuracy, enabling precise engraving of complex circuit patterns, improving the yield rate of PCB production, and shortening exposure time. Measurement and Control: It can be used in laser tool setters. For example, the HPS-LCA100 high-precision laser tool setter utilizes a 405nm violet laser diode module. Its shorter wavelength enables higher measurement accuracy and improved anti-interference capabilities, enabling stable, rapid, and precise tool measurement under the complex working conditions of CNC machining centers.
Biomedical Testing: The 405nm wavelength resonates with absorption wavelengths of substances such as DNA and RNA, and also matches the excitation wavelengths of various biomarkers. Violet alignment laser is commonly used in fluorescent dye excitation, cell imaging, flow cytometry, and Raman spectroscopy, helping researchers observe and analyze biological tissue samples.